Dosage Instructions

Table of Contents

Here are some videos to help you with mixing and administration – https://buypeptides.co.za/video-helpers/

PEPTIDES

5-Amino-1MQ – 0.5MG | 50mcg (per application)

You inject 2ml water into the vial of 5-amino 1MQ from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear orange in colour you draw out 0.2 (20 on the syringe) and inject 2 times per day, each morning (anytime), each night (before 7pm), into the tummy under the skin into the fatty skin layer. A vial should last 5 days.

ACE 031 – 1MG | 25mcg and 50mcg (per application)

You inject 1ml water into the vial of ACE-031 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 50mcg (5 on the syringe) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 50mcg (5 on the syringe) into 25mcg (2.5 on the syringe) and 25mcg (2.5 on the syringe) and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 25mcg (2.5 on the syringe) and then 25mcg (2.5 on the syringe) into other half of the body as an example. A vial should last 18 to 20 days.

ACTH 1-39 – 2MG | 285mcg (per application)

You inject 2ml water into the vial of ACTH 1-39 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

AICAR – 50MG | 7100mcg (7.1mg) (per application)

You inject 2ml water into the vial of AICAR from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

ALARELIN – 5MG | 700mcg (per application)

You inject 2ml water into the vial of Alarelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

AOD – 2MG | 285mcg (per application)

You inject 2ml water into the vial of AOD from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

ARA-290 – 16MG | 2000mcg (2MG) (per application)

You inject 2ml water into the vial of ARA 290 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe) each second night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 8 days.

Argireline – 100MG | 12500mcg (12.5MG) (per application)

You inject 2ml water into the vial of Argireline from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 8 days.

Argireline – 100MG | Topical

You inject 1ml water into the vial of Argireline from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You mix the vial contents into a 50ml cream (Non scented) or non scented oil and apply to the skin area as needed.

 ASTRESSIN-B – 2MG | 285mcg (per application)

You inject 2ml water into the vial of Astressin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 on the syringe each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

B7-33 – 6MG | 750mcg – 860mcg (per application)

You inject 2ml water into the vial of B7-33 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 – 0.3 (25 – 30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7-8 days.

BPC 157 – 5MG | 625mcg – 715mcg (per application)

You inject 2ml water into the vial of BPC from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 – 0.3 (25 – 30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7-8 days.

CHONLUTEN – 20MG | 2000mcg (2MG) (per application)

You inject 2ml water into the vial of Chonluten from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 20 (0.2) on the syringe and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

CJC1295 – 2MG | 95mcg (per application)

You inject 2ml water into the vial of CJC1295 from the water vial. 1 full syringe is 1ml.You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.1 (10 on the syringe) each morning before breakfast, at lunch time and before bed, and inject it into the tummy under the skin into the fatty skin layer. It’s a total of 0.3 (30 on the syringe) per day taken in three lots, before breakfast, lunch time and before bed. A vial should last 7 days.

CJC DAC – 2MG | 490mcg (per application)

You inject 2.5ml water into the vial of CJC1295 DAC from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.6 (60 on the syringe) twice a week evenly spaced on the days each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 2 weeks.

CORTAGEN – 20MG – 2000mcg (2MG) (per application)

You inject 2ml water into the vial of Cortagen from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 20 (0.2) on the syringe and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

DERMORPHIN – 10MG | 1500mcg (1.5MG) (per application)

You inject 3ml water into the vial of Dermorfin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 45 (43 units) on the syringe at any time of day / night and inject it into the tummy under the skin into the fatty skin layer.

** Higher doses can be used however please consult with our support staff before proceeding **.

DSIP – 2MG | 100mcg – 200mcg (per application)

You inject 2ml water into the vial of DSIP from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.1 – 0.2 (10 – 20 on the syringe), as tolerance increases , on the syringe each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10-20 days depending on dose used.

Epithalon – 10MG | 1425mcg (1.425MG) (per application)

You inject 2ml water into the vial of Epithalon from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Epithalon – 100MG 20 Day | 5000mcg (5MG) (per application)

You inject 3.5ml water into the vial of Epithalon 100MG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. This is MG per injection. A vial should last 20 days.

Epithalon – 100MG 30 Day | 3333mcg (3.33MG) (per application)

You inject 3.5ml water into the vial of Epithalon 100MG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.14 (14 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. This is 3.3MG per injection. A vial should last 30 days.

EPO –  3000IU | 425iu (per application)

You inject 2ml water into the vial of EPO from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Follistatin 344 – 1MG | 25mcg – 50mcg (per application)

You inject 1ml water into the vial of FOLLISTATIN 344 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 50mcg (5 on the syringe) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 50mcg (5 on the syringe) into 25mcg (2.5 on the syringe) and 25mcg (2.5 on the syringe) and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 25mcg (2.5 on the syringe) and then 25mcg (2.5 on the syringe) into other half of the body as an example. A vial should last 18 to 20 days.

GDF-8 – 1MG | 25mcg – 50mcg (per application)

You inject 2ml water into the vial of GDF-8 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 100mcg (10 on the syringe) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 100mcg (10 on the syringe) into 50mcg (5 on the syringe) and 50mcg (5 on the syringe) and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 50mcg (5 on the syringe) and then 50mcg (5 on the syringe) into the other half of the body as an example. A vial should last 18 to 20 days.

GHK cu – 100MG | 10000mcg (10MG) (per application)

You inject 2ml water into the vial of GHK cu from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear blue in colour you draw out 0.2 (20 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

GHK-cu – 100MG | Topical

You inject 1ml water into the vial of GHK-cu++ from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You mix the vial contents into a 50ml cream (Non scented) or non scented oil and apply to the skin area as needed.

GHRP 2 – 10MG – 333mcg (3.33MG) (per application)

You inject 3ml water into the vial of GHRP 2 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.1 (10 on the syringe) each morning before breakfast, 0.1 (10 on the syringe) before lunch and 0.1 (10 on the syringe) before bed and inject it into the tummy under the skin into the fatty skin layer. This is a total of 0.3 (30 on the syringe) a day, A vial should last 10 days.

GHRP 6 -10MG | 333mcg (3.33MG) (per application)

You inject 3ml water into the vial of GHRP 6 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.1 (10 on the syringe) each morning before breakfast, 0.1 (10 on the syringe) before lunch and 0.1 (10 on the syringe) before bed and inject it into the tummy under the skin into the fatty skin layer. This is a total of 0.3 (30 on the syringe) a day, A vial should last 10 days.

GLUTATHIONE 3.5ML Vial – 600MG | 42857mcg (42.8MG) (per application)

You inject 2.5ml water into the vial of GSH from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.15 (15 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 14 days.

GLP-1 – 3MG | 250mcg, 500mcg and 750mcg (per application)

You inject 3ml water into the vial of GLP-1 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour the vial is ready for use. GLP-1 vials mixed or unmixed, need to be kept in the fridge, not the freezer. They must be stored between 4 and 20 celcius.

START DOSE :

The start dose is 0.25 mg once a week for the first 4 weeks. This will help give your body a chance to get used to the medicine.

Week 1 – 4 :

0.25mg per week (250mcg)
You draw out 0.25 (25 on syringe) once a week and inject subcutaneously into the stomach. These injections can be taken with or without food. The injection should be taken on the same day each week at more or less the same time, and injected into the tummy under the skin, into the fatty layer. Your first course should use 1mg of the 3 mg vial (one third of the vial).

INTERMEDIARY DOSE :

At week 5, your dose should increase to 0.5 mg once a week to maintain results.

Week 5 – 8:

0.5mg per week (500mcg)
You draw out 0.5 (50 on syringe) once a week and inject subcutaneously into the stomach. These injections can be taken with or without food. The injection should be taken on the same day each week at more or less the same time, and injected into the tummy under the skin into the fatty layer. Your intermediary course should use 2mg of the 3 mg vial (two thirds of the vial).

ADVANCED DOSE :

At week 9, your dose can increase to 0.75 mg once a week to maintain results and no more than 1mg.

Week 9 – 12:

0.75mg per week (750mcg)
You draw out 0.75 (75 on syringe) once a week and inject subcutaneously into the stomach. These injections can be taken with or without food. The injection should be taken on the same day each week at more or less the same time, and injected into the tummy under the skin into the fatty layer. Your advanced course should use 3mg of the 3 mg vial (entire vial).

You may change the day of the week you use GLP-1 as long as your last dose was taken 2 or more days before.

GLP-1 5MG VIAL OPTION :

Additional support for diabetes
Your average blood sugar level needs may shift as your type 2 diabetes changes. That’s why we offer offer higher strength vials that deliver up to 5mg a vial, where for this maintenance of blood sugar levels may require doses of 1 mg or 2 mg per injection, to give you additional average blood sugar control. And while your dose may change, nothing will change about how you take GLP-1 in terms of administration.

USE OF GLP-1 FOR BLOOD SUGAR CONTROL IN DIABETICS, MUST BE DIAGNOSED, PRESCRIBED AND MANAGED BY A QUALIFIED MEDICAL PROFESSIONAL ONLY. RESEARCH PEPTIDES SOUTH AFRICA IS NOT ABLE TO ASSIST WITH THIS AND CANNOT SUPPLY THIS ITEM FOR USE IN THIS WAY WITHOUT VALID DOCTORS SCRIPT AND AUTHORIZATION.

GLP-1 – 5MG | 250mcg, 500mcg and 750mcg (per application)

You inject 3ml water into the vial of GLP-1 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour the vial is ready for use. GLP-1 vials mixed or unmixed, need to be kept in the fridge, not the freezer. They must be stored between 4 and 20 celcius.

START DOSE :

The start dose is 0.25 mg once a week for the first 4 weeks. This will help give your body a chance to get used to the medicine.

Week 1 – 4 :

0.25mg per week (250mcg)
You draw out 0.15 (15 on syringe) once a week and inject subcutaneously into the stomach. These injections can be taken with or without food. The injection should be taken on the same day each week at more or less the same time, and injected into the tummy under the skin, into the fatty layer. Your first course should use 1mg of the 3 mg vial (one third of the vial).

INTERMEDIARY DOSE :

At week 5, your dose should increase to 0.5 mg once a week to maintain results.

Week 5 – 8:

0.5mg per week (500mcg)
You draw out 0.3 (30 on syringe) once a week and inject subcutaneously into the stomach. These injections can be taken with or without food. The injection should be taken on the same day each week at more or less the same time, and injected into the tummy under the skin into the fatty layer. Your intermediary course should use 2mg of the 3 mg vial (two thirds of the vial).

ADVANCED DOSE :

At week 9, your dose can increase to 0.75 mg once a week to maintain results and no more than 1mg.

Week 9 – 12:

0.75mg per week (750mcg)
You draw out 0.45 (45 on syringe) once a week and inject subcutaneously into the stomach. These injections can be taken with or without food. The injection should be taken on the same day each week at more or less the same time, and injected into the tummy under the skin into the fatty layer. Your advanced course should use 3mg of the 3 mg vial (entire vial).

You may change the day of the week you use GLP-1 as long as your last dose was taken 2 or more days before.

GLP-1 5MG VIAL OPTION :

Additional support for diabetes
Your average blood sugar level needs may shift as your type 2 diabetes changes. That’s why we offer offer higher strength vials that deliver up to 5mg a vial, where for this maintenance of blood sugar levels may require doses of 1 mg or 2 mg per injection, to give you additional average blood sugar control. And while your dose may change, nothing will change about how you take GLP-1 in terms of administration.

USE OF GLP-1 FOR BLOOD SUGAR CONTROL IN DIABETICS, MUST BE DIAGNOSED, PRESCRIBED AND MANAGED BY A QUALIFIED MEDICAL PROFESSIONAL ONLY. RESEARCH PEPTIDES SOUTH AFRICA IS NOT ABLE TO ASSIST WITH THIS AND CANNOT SUPPLY THIS ITEM FOR USE IN THIS WAY WITHOUT VALID DOCTORS SCRIPT AND AUTHORIZATION.

GLUTATHIONE 10ML Vial – 600MG | 42857mcg (42.8MG)

You inject 5ml water into the vial of GSH from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 14 days.

GNRH – 5MG | 715mcg (per application)

You inject 2ml water into the vial of GNRH from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) on the syringe each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Gonadorelin – 2MG | 285mcg (per application)

You inject 2ml water into the vial of Gonadorelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

GW501516 – 50MG | 5000mcg (5MG) (per application)

You inject 2ml water into the vial of GW501516 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

HCG – 5000IU PCT Protocol | 714iu (per application)

You inject 2ml water into the vial of HCG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

HCG – 5000IU 20 day Weight-loss Protocol | 250iu (per application)

You inject 3ml water into the vial of HCG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.15 (15 on the syringe) on the syringe each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 20 days.

HCG – 5000IU 30 day Weight-loss Protocol | 166iu (per application)

You inject 3.5ml water into the vial of HCG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.11 (11 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 30 days.

HEP-1 10MG | 2000mcg (2mg) and 500mcg (per application)

You inject 2ml water into the vial of HEP-1 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.4 (40 on the syringe) on the syringe and inject it into the tummy under the skin into the fatty skin layer every 12 hours until symptoms go away. Then the maintenance dose needed is 0.1 (10 on the syringe) for 10 days thereafter. A vial used for starting dose should last around 2.5 days. Maintenance protocol, a vial lasts 20 days.

Hexarelin – 2MG | 285mcg (per application)

You inject 2ml water into the vial of Hexarelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

HGH FRAGMENT 176-191 – 2MG | 400mcg (per application)

You inject 2ml water into the vial of HGH Fragment from the water vial. 1 full syringe is 1ml.You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and milky in colour you draw out 0.2 (20 on the syringe) each morning, 15 min to 30 min before exercise (If not exercising use before breakfast on empty stomach) and use 0.2 (20 on the syringe) each night before supper, and inject it into the tummy under the skin into the fatty skin layer. It’s a total of 0.4 (40 on the syringe) on the syringe per day taken in two lots, before breakfast and before supper. A vial should last 5 days.

HGH FRAGMENT 176-191 – 5MG | 1000mcg (per application)

You inject 2ml water into the vial of HGH Fragment from the water vial. 1 full syringe is 1ml.You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and milky in colour you draw out 0.2 (20 on the syringe) each morning, 15 min to 30 min before exercise (If not exercising use before breakfast on empty stomach) and use 0.2 (20 on the syringe) each night before supper, and inject it into the tummy under the skin into the fatty skin layer. It’s a total of 0.4 (40 on the syringe) on the syringe per day taken in two lots, before breakfast and before supper. A vial should last 5 days.

HGH Jintropin – 10IU – 4iu (per application)

You inject 1ml water into the vial of HGH from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on syringe) on the syringe each day before breakfast on an empty stomach, and draw out 0.2 (20 on syringe) again before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 2.5 days. Total dose per day recommended to be 0.4 or in this case 4iu (40 on syringe)

HMG – 75IU | 10.7iu (per application)

You inject 2ml water into the vial of HMG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Humanin – 2MG | 1000mcg (1MG) (per application)

You inject 1ml water into the vial of Humanin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.5 (50 on the syringe) on the syringe and inject into stomach sub cutaneous 2 times a week evenly spaced in days. A vial should last 2 days.

IGF1-DES – 1MG | 25mcg – 50mcg (per application)

You inject 1ml water into the vial of IGF1-DES from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 50mcg (5 on the syringe) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 50mcg (5 on the syringe) into 25mcg (2.5 on the syringe) and 25mcg (2.5 on the syringe) and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 25mcg (2.5 on the syringe) and then 25mcg (2.5 on the syringe) into other half of the body as an example. A vial should last 18 to 20 days.

IGF1-DES -1MG double up easier dose | 50mcg – 100mcg (per application)

You inject 2ml water into the vial of IGF1-DES from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 100mcg (10 on the syringe) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 100mcg (10 on the syringe) into 50mcg (5 on the syringe) and 50mcg (5 on the syringe) and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 50mcg (5 on the syringe) and then 50mcg (5 on the syringe) into the other half of the body as an example. A vial should last 18 to 20 days.

IGF1-LR3 1MG | 25mcg – 50mcg (per application)

You inject 1ml water into the vial of IGF1-LR3 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 50mcg (5 on the syringe) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 50mcg (5 on the syringe) into 25mcg (2.5 on the syringe) and 25mcg (2.5 on the syringe) and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 25mcg (2.5 on the syringe) and then 25mcg (2.5 on the syringe) into other half of the body as an example. A vial should last 18 to 20 days.

IGF1-LR3 – 1MG double up easier dose | 50mcg – 100mcg (per application)

You inject 2ml water into the vial of IGF1-LR3 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 100mcg (10 on the syringe) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 100mcg (10 on the syringe) into 50mcg (5 on the syringe) and 50mcg (5 on the syringe) and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 50mcg (5 on the syringe) and then 50mcg (5 on the syringe) into the other half of the body as an example. A vial should last 18 to 20 days.

Ipamorelin – 2MG | 100mcg – 150mcg (per application)

You inject 2ml water into the vial of Ipamorelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.1 (10 on the syringe) each morning before breakfast, 0.1 each day before lunch, and 0,1 each day before bed. So a tctal of 300 mcg a day, you inject it into the tummy under the skin into the fatty skin layer. A vial should last 5 days. The doses respectively can be increased after week 1 to 0.15 ie. 450mcg a day.

Kisspeptin – 5MG | 500mcg (per application)

You inject 1ml water into the vial of Kisspeptin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.1 (10 or 1iu – one tenth of your syringe) on the syringe 4 times a week evenly spaced in days. Inject in the morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 2 weeks.

KPV – 2MG | 285mcg (per application)

You inject 2ml water into the vial of KPV from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out of the vial 30 (0.3) on the syringe and inject it into the tummy under the skin into the fatty skin layer each day. A vial should last 6-7 days.

Lipopeptide – 100MG | 10000mcg (10MG) (per application)

You inject 2ml water into the vial of Lipopeptide from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

LL- 37 – 5MG | 715mcg (per application)

You inject 2ml water into the vial of LL-37 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

MATRIXYL 3000 – 10MG | 1250mcg (1.25MG) (per application)

You inject 2ml water into the vial of Matrixyl from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 8 days.

MATRIXYL 3000 – 10MG | Topical

You inject 1ml water into the vial of Matrixyl 3000 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You mix the vial contents into a 50ml cream (Non scented) or non scented oil and apply to the face. Leave on for 1 hour. Then rinse the face.

Melanotan 2 – 10MG | 100mcg – 200mcg (per application)

you inject 2ml water into the vial of MT2 from the water vial. 1 full syringe is 1ml. you then wait for the vial powder content to dissolve and once dissolved and clear you draw out 0.1 (10 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer – subcutaneous

Melatonin – 10MG | 1000mcg (1MG) (per application)

You inject 2ml water into the vial of Melatonin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

Minoxidil – 10MG | Topical

You inject 1ml water into the vial of this peptide from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You mix the vial contents into a 50ml cream (Non scented) or non scented oil and apply to the scalp. After showering and washing hair. Leave on for 1 hour. Then rinse the head.

MGF – 2MG | 100mcg and 200mcg (per application)

You inject 2ml water into the vial of MGF from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You inject 0.2 (20 on syringe – 200mcg) into the muscle bilaterally. So this means directly into the muscle and bilaterally meaning you split the 200mcg into 100mcg and 100mcg and inject into the corresponding body part on the alternative side of the body. EG. Inject into the bicep on right arm 100mcg and then 100mcg other half of the body as an example. A vial should last 10 days.

MOTS-c – 10MG | 5000mcg (5MG) (per application)

You inject 1ml water into the vial of MOTS-c from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.5 (50 on the syringe) and inject into stomach sub cutaneous 2 times a week evenly spaced in days. A vial should last 7 days.

NAD+/NADH – 0.5MG | 71428mcg (71.4MG) (per application)

You inject 2ml water into the vial of NAD+/NADH from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Oxytocin – 2MG | 200mcg (per application)

You inject 2ml water into the vial of Oxytocin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

P21 – 50MG | 2500mcg (2.5MG) – 5000mcg (5MG) (per application)

You inject 2ml water into the vial of P21 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.1 (10 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. This can be slowly increased from 0.1 (10 on the syringe) to 0.2 (20 on the syringe) per injection. A vial should last 15-20 days.

Pal GHK – 10MG | 1000mcg (1MG) (per application)

You inject 2ml water into the vial of Pal GHK from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2 (20 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days.

PE-22-28 – 8MG | 1000mcg (1mg) – 1150mcg (1.15MG) (per application)

You inject 2ml water into the vial of PE 22-28 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 – 0.3 (25 – 30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7-8 days.

PEG MGF – 2MG | 200mcg – 400mcg (per application)

You inject 2ml water into the vial of PEG MGF from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.2-0.4 (20-40 on the syringe) and inject 3 times a week evenly spacing injections. A vial should last 5-10 days.

Pinealon – 20MG | 1000mcg (1MG) – 2000mcg (2MG) (per application)

You inject 2ml water into the vial of Pinealon from the watervial. 1 full syringe is 1ml. you then wait for the vial powder content to dissolve and once dissolved and clear you draw out 0.1 – 0.2 (10 – 20 on the syringe (100 to 200 mcg)) 1 hour before activity. Inject it into the tummy under the skin into the fatty skin layer. A vial should last 10 days

PNC-27 – 5MG | 250mcg – 500mcg (per application)

You inject 2ml water into the vial of PNC-27 from the watervial. 1 full syringe is 1ml. you then wait for the vial powder content to dissolve and once dissolved and clear you draw out 0.1 – 0.2 (10 – 20 on the syringe (100 to 200 mcg)) and inject it around the site of cancer tumor/site or as close as possible to this area, into the skin under the skin into the fatty skin layer . A vial should last 10-20 days

PT141 – 10MG | 500mcg – 1000mcg (1MG) (per application)

You inject 2ml water into the vial of PT141 from the watervial. 1 full syringe is 1ml. you then wait for the vial powder content to dissolve and once dissolved and clear you draw out 0.1 – 0.2 (10 – 20 on the syringe (100 to 200 mcg)) 1 hour before activity. Inject it into the tummy under the skin into the fatty skin layer

PYY3-36 – 5MG | 200mcg (per application)

You inject 2ml water into the vial of PYY3-36 from the water vial. 1 full syringe is 1ml. you then wait for the vial powder content to dissolve and once dissolved and clear you draw out 0.08 (8 on the syringe (200mcg)) and inject it into the tummy under the skin into the fatty skin layer. 1 vial lasts 20 days

RU58841 – 10MG | Topical

You inject 1ml water into the vial of RU58841 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You mix the vial contents into a 50ml cream (Non scented) or non scented oil and apply to the scalp. After showering and washing hair. Leave on for 1 hour. Then rinse the head.

Selank – 5MG | 625mcg (per application)

You inject 2ml water into the vial of Selank from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 8 days.

Semax – 10MG | 1250mcg (1.25MG) (per application)

You inject 2ml water into the vial of Semax from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe (250mcg)) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 8 days.

Sermorelin – 2MG | 285mcg (per application)

You inject 2ml water into the vial of Sermorelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

SNAP-8 – 10MG | 1250mcg (1.25MG) (per application)

You inject 2ml water into the vial of Snap-8 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 8 days.

Snap-8 – 10MG | Topical

You inject 1ml water into the vial of Snap 8 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You mix the vial contents into a 50ml cream (Non scented) or non scented oil and apply to the skin area as needed.

SNAP-8 – 20MG | 2500mcg (2.5MG) (per application)

You inject 2ml water into the vial of Snap-8 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 8 days.

Syn-AKE – 200MG | Topical

You inject 1ml water into the vial of Syn-AKE from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour. You mix the vial contents into a 50ml cream (Non scented) or non scented oil and apply to the face. Leave on for 1 hour. Then rinse the face.

TB500 – 2MG | 2000mcg (2MG) (per application)

You inject 1ml water into the vial of TB500 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out the entire vial and inject it into the tummy under the skin into the fatty skin layer. A vial should last 1 usage once a week.

TB500 – 5MG | 5000mcg (5MG) (per application)

You inject 1ml water into the vial of TB500 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out the entire vial and inject it into the tummy under the skin into the fatty skin layer. A vial should last 1 usage once a week.

TB500 – 20MG – 5000mcg (5MG) (per application)

You inject 2ml water into the vial of TB500 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.4 (40 on the syringe) and inject it into the tummy under the skin into the fatty skin layer. This will give you a 5MG dose of TB500 used once a week . A vial should last 1 usage once a week for 4 weeks

Tesamorelin – 2MG | 285mcg (per application)

You inject 2ml water into the vial of Tesamorelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Tesamorelin – 5MG | 715mcg (per application)

You inject 2ml water into the vial of Tesamorelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each morning before breakfast and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Testagen – 20MG | 2000mcg (2MG) – 4000mcg (4MG) (per application)

You inject 2ml water into the vial of Testagen from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out of the vial as follows :
Starting : 20 (0.2) on the syringe and inject it into the tummy under the skin into the fatty skin layer for 2-3 days to check tolerance.
Continuation : Increase to maximum of 40 (0.4) gradually on the syringe and inject it into the tummy under the skin into the fatty skin layer. A vial should last 5-7 days.

Tirzepatide – 2mg |  2000mcg (2MG) (per application)

You inject 1ml water into the vial of Tirzepatide from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out the entire vial and inject it into the tummy under the skin into the fatty skin layer. A vial should last 1 usage once a week. A vial should last 7 days.

Tirzepatide – 5mg | 2500mcg (2.5mg) (per application)

You inject 1ml water into the vial of Tirzepatide – 5MG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.5 (50 on the syringe) and inject it into the tummy under the skin into the fatty skin layer. A vial should last 2 weeks.

Tirzepatide – 10mg | 2500mcg (2.5mg) (per application)

You inject 1ml water into the vial of Tirzepatide – 10MG from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.25 (25 on the syringe) and inject it into the tummy under the skin into the fatty skin layer. A vial should last 1 usage once a week. A vial should last 4 weeks.

Triptorelin – 2MG | 2000mcg (2MG) (per application)

You inject 1ml water into the vial of Triptorelin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out the entire vial and inject it into the tummy under the skin into the fatty skin layer on day 1 and another full vial on day 15. A vial should last 1 helping. 2 vials recommended

TRH Thyrotropin 20MG | 2850mcg (2.85MG) (per application)

You inject 2ml water into the vial of TRH from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Thymalin – 10MG | 1425mcg (1.42MG) (per application)

You inject 2ml water into the vial of Thymalin from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Thymosin Alpha 1 – 2MG | 285mcg (per application)

You inject 2ml water into the vial of Thymosin Alpha 1 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Thymosin Alpha 1 – 5MG | 714mcg (per application)

You inject 2ml water into the vial of Thymosin Alpha 1 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

Thymosin Alpha 1 – 15MG | 2150mcg (2.15MG) (per application)

You inject 2ml water into the vial of Thymosin Alpha 1 from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in colour you draw out 0.3 (30 on the syringe) each night before bed and inject it into the tummy under the skin into the fatty skin layer. A vial should last 7 days.

PEPTIDE – NASAL SPRAYS

AICAR Nasal Spray – 50MG | 833mcg (per spray)

Inject 1 ml water into the vial of AICAR Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

AOD Nasal Spray – 2MG | 33.33mcg (per spray)

Inject 1 ml water into the vial of AOD Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

BPC 157 Nasal Spray – 5MG | 83.3mcg (per spray)

Inject 1 ml water into the vial of BPC Acetate from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

BPC157 5MG / TB-500 5MG Nasal Spray | 166mcg (per spray)

Inject 1 ml water into the vial of BPC157 5mg / TB-500 5mg Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

CJC1295 Nasal Spray – 2MG | 33.33mcg (per spray)

Inject 1 ml water into the vial of CJC1295 Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

DSIP Nasal Spray – 2MG | 33.3mcg (per spray)

Inject 1 ml water into the vial of DSIP Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

Epithalon Nasal Spray – 10MG  | 166mcg (per spray)

Inject 1 ml water into the vial of Epithalon from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 3 times per nostril at night before bed.

GHK Nasal Spray – 100MG | 1666mcg (1.66MG) (per spray)

Inject 1 ml water into the vial of GHK Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night.

GHRP 2 Nasal Spray – 10MG | 166mcg (per spray)

Inject 1 ml water into the vial of GHRP2 Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night.

GHRP6 Nasal Spray – 10MG |  166mcg (per spray)

Inject 1 ml water into the vial of GHRP6 Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night.

Gonadorelin Nasal Spray – 2MG | 33.33mcg (per spray)

Inject 1 ml water into the vial of Gonadorelin Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night.

Hexarelin Nasal Spray – 2MG | 33.3mcg (per spray)

Inject 1 ml water into the vial of Hexarelin Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night.

HEP-1 Nasal Spray – 10MG – 166mcg (per spray)

Inject 1 ml water into the vial of HEP-1 from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed until symptoms subside.

HGH Fragment 176-191 Nasal Spray – 2MG | 33.3mcg (per spray)

Inject 1 ml water into the vial of HGH Fragment 176-191 Nasal Spray from the vial of water. 1 ml is a full syringe. Do not shake the vial to mix powder and water, allow this to mix on its own till clear in colour, should take around 5 minutes. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal sprayer bottle. Then inject the balance of all the water in the 2 water vials (5ml each) or 1 vial of water (10ml) into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril in the evening before bed.

Ipamorelin Nasal Spray – 2MG | 33.3mcg (per spray)

Inject 1 ml water into the vial of Ipamorelin Nasal spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

LL- 37 Nasal Spray – 5MG | 83.33mcg (per spray)

Inject 1 ml water into the vial of LL-37 Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

Melanotan 2 Nasal Spray – 10MG | 166mcg (per spray)

Inject 1 ml water into the vial of MT2 from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

MOTS-c Nasal Spray – 10MG | 166mcg (per spray)

Inject 1 ml water into the vial of MOTS-c from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

Oxytocin Nasal Spray – 2MG | 33.3mcg (per spray)

Inject 1 ml water into the vial of Oxytocin from the vial of water. 1 ml is a full syringe. Do not shake the vial to mix powder and water, allow this to mix on its own till clear in colour, should take around 5 minutes. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal sprayer bottle. Then inject the balance of all the water in the 2 water vials (5ml each) or 1 vial of water (10ml) into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times a day per nostril and increase to 4 times a day per nostril after week 1.

P21 Nasal Spray – 50MG | 833mcg (per spray)

Inject 1 ml water into the vial of P21 from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials (5ml each) or 1 vial of water (10ml) into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril a day. A bottle should last 20 days.

PT141 Nasal Spray – 10MG – 166mcg (per spray)

Inject 1 ml water into the vial of PT141 from the vial of water. 1 ml is a full syringe. Do not shake the vial to mix powder and water, allow this to mix on its own till clear in colour, should take around 5 minutes. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal sprayer bottle. Then inject the balance of all the water in the 2 water vials (5ml each) or 1 vial of water (10ml) into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times a day per nostril before bed.

Selank Nasal Spray – 5MG | 83.33mcg (per spray)

Inject 1 ml water into the vial of Selank from the vial of water. 1 ml is a full syringe. Do not shake the vial to mix powder and water, allow this to mix on its own till clear in colour, should take around 5 minutes. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal sprayer bottle. Then inject the balance of all the water in the 2 water vials (5ml each) or 1 vial of water (10ml) into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times a day per nostril and increase to 4 times a day per nostril in one week’s time 2 sprays at once. to start 2 sprays in the morning then increase to 2 sprays in the morning and 2 sprays in the afternoon.

Semax Nasal Spray – 10MG | 166mcg (per spray)

Inject 1 ml water into the vial of Semax from the vial of water. 1 ml is a full syringe. Do not shake the vial to mix powder and water, allow this to mix on its own till clear in colour, should take around 5 minutes. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal sprayer bottle. Then inject the balance of all the water in the 2 water vials (5ml each) or 1 vial of water (10ml) into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril in the morning after breakfast.

Sermorelin Nasal Spray – 2MG | 33.33mcg (per spray)

Inject 1 ml water into the vial of Sermorelin Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

Tesamorelin Nasal Spray – 2MG | 33.33mcg (per spray)

Inject 1 ml water into the vial of Tesamorelin from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

Thymalin Nasal Spray – 10MG | 166mcg (per spray)

Inject 1 ml water into the vial of Thymalin Nasal Spray from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

Thymosin Alpha-1 Nasal Spray – 2MG | 33.33mcg (per spray)

Inject 1 ml water into the vial of Thymosin Alpha-1 from the vial of water. 1 ml is a full syringe. Do not shake the vial to mix powder and water, allow this to mix on its own till clear in colour, should take around 5 minutes. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal sprayer bottle. Then inject the balance of all the water in the 2 water vials (5ml each) or 1 vial of water (10ml) into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril in the evening before bed.

VIP Nasal Spray – 1MG |  16.66mcg (per spray)

Inject 1 ml water into the vial of VIP from the vial of water. 1 ml is a full syringe. Draw out all the contents of the vial once mixed and clear in colour and inject into the nasal bottle. Then inject the balance of all the water in the 2 water vials 5ml each / 1 vial 10ml into the nasal bottle. So in total there will be 10ml water in the nasal bottle and the contents of the vial. Spray 2 times per nostril at night before bed.

PEPTIDE – BLENDS

BPC 157 – 10MG / TB 500 – 10MG | 1000mcg of each compound (per application) | 2000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

BPC 157 – 5MG / TB 500 – 5MG | 500mcg of each compound (per application) | 1000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

CJC NO DAC – 10MG / IPAMORELIN – 15MG | 665mcg of CJC NO DAC, 1000mcg of IPAMORELIN (per application) | 1665mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.2 (20 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 15 days.

CJC 1295 NO DAC – 3MG / IPAMORELIN – 3MG / GHRP 2 – 3MG | 300mcg of each compound (per application) | 900mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

CJC NO DAC – 5MG / GHRP-2 – 5MG | 500mcg of each compound (per application) | 1000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

CJC NO DAC – 5MG / GHRP-6 – 5MG | 500mcg of each compound (per application) | 1000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

CJC NO DAC – 5MG / HEXARELIN – 5MG | 500mcg of each compound (per application) | 1000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

HGH Fragment 196-171 – 6MG / CJC NO DAC – 3MG / IPAMORELIN – 3MG | 600mcg of HGH Fragment etc

HGH Fragment 196-171 – 6MG / CJC NO DAC – 3MG / IPAMORELIN – 3MG | 600mcg of HGH Fragment 196-171,  300mcg of CJC NO DAC and 300mcg of  IPAMORELIN (per application) | 1200mcg total This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

SERMORELIN – 3MG / GHRP-2 – 3MG / GHRP 6 – 3MG | 300mcg of each compound (per application) | 900mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

SERMORELIN – 5MG / GHRP-2 – 5MG | 500mcg of each compound (per application) | 1000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

SERMORELIN – 5MG / GHRP-6 – 5MG | 500mcg of each compound (per application) | 1000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

SERMORELIN – 5MG / IPAMORELIN – 5MG | 500mcg of each compound (per application) | 1000mcg total

This blend is best used by injecting 3ml of water into the vial from the water vial. 1 full syringe is 1ml. You then wait for the vial powder content to dissolve ON ITS OWN. DO NOT SHAKE THE VIAL TO MIX POWDER. Once dissolved and clear in color you draw out 0.3 (30 on the syringe) each morning before breakfast into the tummy under the skin into the fatty skin layer. This is a total of 0.3 a day, A vial should last 10 days.

SARMS – Selective Androgen Receptor Modulators

ACP-105

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take one capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

ACP-262,356

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take one capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

AICAR – (Aminoimidazole Carboxamide Ribonucleotide)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take one capsule a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

S4 (Andarine)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

GW-501516 (Cardarine)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

GW-0742 (proliferator-activated receptor agonist)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

LGD4033 (Ligandrol, VK5211, Anabolicum)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take one capsule a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

MK2866 (Ostarine)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsule a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

MK677 (Ibutamoren Mesylate)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsule a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

RAD-140 (Testolone)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

RAD-150 (TLB-150 Benzoate)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

S23 (S-23)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take one capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

SR-9009 (REV-ERB agonist, Stenabolic)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take one capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

SR-9011 (REV-ERBα/β agonist hydrochloride)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take one capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise

YK-11 (20-diene-21-carboxylic acid methyl ester)

Week 1 Take one capsule a day 1 hour before gym/exercise | Week 2 Take two capsules a day 1 hour before gym/exercise

Week 3 Take two capsules a day 1 hour before gym/exercise | Week 4 Take two capsules a day 1 hour before gym/exercise